Fluorometers Cells

Starna Cells for Fluorometers
Fluorometer cells have at least three windows clear. They are designed for use in a fluorometer which passes an excitation beam through the cell and then reads the fluoresence emission at a 90 degree angle. There are many variations on this theme and we make a wide range of cells to allow you to use everything from normal full volume cells to very small volumes.
Standard Rectangular Full interior width
Open Top, Standard Most commonly used fluorometer cells!
Stopper Top, Standard Stopper top for volatile samples
Screw Top, Standard Standard cells with tight sealing screw cap
Septum Top, Standard Standard cells with septum screw cap
Semi-Micro Sample chamber 4mm wide, Volume reduced by 60% of standard cell
Open Top, Semi-micro Reduce sample volume by 60%
Stopper Top, Semi-micro Stopper top for volatile samples
Screw Top, Semi-micro Semi-micro cells with tight sealing screw cap
Septum Top, Semi-micro Semi-micro cells with septum screw cap
Micro Sample chamber 2mm wide, Volume reduced by 80% of standard cell
Open Top, Micro Reduce sample volume by 80%
Stopper Top, Micro Stopper top for volatile samples
Screw Top, Micro Micro cells with tight sealing screw cap
Septum Top, Micro Micro cells with septum screw cap
Micro, Square Small Volume cells with square cross section
Open Top, Square Micro Reduced volume and square cross section
Stopper Top, Square Micro Reduced volume, square with stopper
Sub-Micro Highly optimized cells for sample volumes from 10 to 160 microliters
Sub-micro cells Sample volumes from 160 to 10 microliter
Flowcells Flowcells optimized for fluorometers
Fluorometer flow cells Range of flow cells with volumes from 0.008 to 4.0 ml