Temperature-control-kinetics
STR-773 Water thermostatted cell holder with stirrer
The STR-773 Water thermostatted cell holder with stirrer is used with a temperature controlled circulating water bath (not supplied) to maintain a constant sample and reference cell temperature.
The STR-773 accepts standard 10 mm path length cells. A magnetic stirrer is included to maintain temperature equilibrium in both cell positions.
Specifications
NCP-706 specifications
| Sample movement | Linear |
| Cell type | 10-mm rectangular cell, Micro Cell (min. sample width 2 mm) |
| Thermostatic method | Circulation of constant temperature water |
| Operating temperature | Room temperature plus 10° -90°C |
| Reference cell holder | Constant temperature single-cell holder |
| Dimensions | 130 (W) x 255 (D) x 123 (H) mm |
| Weight | 2.5 kg |
NCP-705 6-position non-thermostatted automatic cell changer NCP-706 Water thermostatted 6-position automatic cell changer
The NCP-705 and NCP-706 6-position automatic cell changers for up to 6 sample positions. The sample position can be selected using software control and can be used with cell path lengths up to 10 mm.
A single cell is used for the reference position for both the NCP-705/706 automatic six cell changers.
The NCP-706 includes temperature control using a water-thermostatted circulator.
CSP-909 Sample Holder Lid with Syringe Port for V-700 models
The optional CSP-909 lid is used for adding a reagent solution with a syringe without having to open the sample chamber when initiating fast reactions. The syringe port lid can be used together with the STR-773, ETHS-760, ETCS-761 or ETCS-762 cell holders.
HMC-711 Water Thermostatted Micro Cell Holder (100 µL, 200 µL)
The HMC-711 Water Thermostatted Micro Cell Holder is used with a temperature controlled circulating water bath (not supplied) to maintain a constant sample temperature. The cell holder accepts standard 10 mm path length cells with a minimum path width of 2 or 4 mm.
Specifications
5 or 10 mm path length square micro cell
Optional cells
| Item | P/N | Specification |
| Rectangular micro quartz cell | 1103-0025 | 5 mm path, 2 mm width |
| Rectangular micro quartz cell | 1103-0030 | 10 mm path, 4 mm width |
| Rectangular micro quartz cell | 1103-0026 | 10 mm path, 2 mm width |
| Rectangular micro quartz black cell | 1103-0031 | 10 mm path, 4 mm width |
| Rectangular micro quartz black cell | 1103-0032 | 10 mm path, 2 mm width |
1103-0026
10 mm path, 2 mm width
100 µL minimum volume
1103-0032
10 mm path, 2 mm width
100 µL minimum volume
MHT-745 Manual 4-position water thermostatted turret cell holder
The MHT-745 is used with a temperature controlled circulating water bath. The 4-position turret cell holder can be rotated manually for measurement of up to four samples. Requires four 10×10 mm rectangular cells (not included).
Specifications
| Thermostatted cells | 10-mm rectangular cell Sample-side cell holder: 4 Reference side cell holder: 1 |
| Operating temperature | Room temperature plus 10 to 90°C |
| Circulating water inlet | Uni-tube (⌽7 x ⌽5 mm) |
EHCS-760 Peltier thermostatted single position cell holder (air-cooled)
This Peltier cell holder precisely maintains the specified sample temperature. The cell holder includes a stirrer for uniform cell temperature. The EHC-760 cell holder is an air-cooled accessory for temperature control without using a water circulator.
OPS-512 Optional temperature sensor for EHCS-760
OPS-512 OP sensor for direct temperature measurement in the sample cell for both the ETC-760 or EHC-761.
Specifications
| Thermostatted Cell | 10-mm rectangular cell (sample side) |
| Temperature control system | Heating/cooling system using Peltier effect |
| Heat radiating system | Air cooled |
| Stirring system | Magnetic stirrer (variable speed) |
| Temperature setting range | 5 to 70°C |
| Temperature control range | 10 to 60°C (for room temperature = 20°C) |
| Temperature control accuracy | ± 0.1°C |
| Temperature accuracy | (Difference between displayed temperature and actual cell temperature) 20°C to 40°C ± 0.5°C ± 1°C when set temperature is outside the above range |
| Temperature setting difference | (Difference between set temperature and displayed temperature) 20°C to 40°C ±0.3°C ± 0.5°C when set temperature is outside the above range |
PSC-763 Automatic 6-position Peltier cell changer (air-cooled)
Model PSC-761 multi-cell accessory for simultaneous temperature controlled measurement in up to 6 sample cells. This cell holder uses air-cooled Peltier effect to control sample temperature with high accuracy. Includes a variable speed stirrer for thermal equilibrium for all sample cells.
OPS-513 Optional temperature sensor for PSC-763
OPS-513 OP sensor for direct temperature measurement in the sample cell.
Specifications
| Thermostatted Cell | Up to six 10 mm rectangular sample cells (ambient reference cell) |
| Temperature control system | Heating/cooling system utilizing Peltier effect |
| Heat radiating system | Forced air cooling |
| Stirring system | Magnetic stirrer (variable speed) |
| Temperature setting range | 10 to 70°C |
| Temperature control range | 15 to 60°C (For room temperature = 20°C) |
| Temperature control accuracy | ±0.1°C |
| Temperature accuracy | (Difference between the displayed temperature and temperature in the cell) 20°C to 40°C ±0.5°C ±1°C when the set temperature is outside the above range |
| Temperature setting difference | (Difference between the set temperature and displayed temperature) 20°C to 40°C ±0.3°C ±0.5°C when the set temperature is outside the above range |